YF330 Industrial Router is an IoT wireless communication router. It is using public cellular network GPRS/CDMA/WCDMA/EVDO/LTE to provide long distance, wireless and large data transmission function for users. The product uses the high-performance industrial-grade 32-bit CPU and wireless module, with the embedded real-time operating system as the software support platform. It provides RS232/RS485, Ethernet port and WIFI that can be connected to the serial device, Ethernet devices and WIFI devices at the same time, achieve data pass-through function.
High-powered industrial cellular module
High-powered industrial 32bits CPU
Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
Housing: iron, providing IP30 protection.
Power range: DC 5~36V
Stability and Reliability
Support hardware and software WDT
Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
Ethernet port: 1.5KV magnetic isolation
RS232/RS485/RS422 port: 15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and over-voltage protection
Antenna port: lightning protection(optional)
Standard and Convenience
Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
Support standard WAN port and PPPOE protocol that can connect to ADSL directly
Support intellectual mode, enter into communication state automatically when powered
Provide management software for remote management
Support several work modes
Convenient configuration and maintenance interface（WEB or CLI）
High-performance
Support multiple WAN access methods, including static ip, DHCP，PPPOE，3G/UMTS/4G/LTE，dhcp-4G
Support double link backup between LTE/ WCDMA and WAN(PPPOE, ADSL) (optional)
Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)
Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)
Support local and remote firmware upgrade, import and export configure file.
Support NTP, RTC embedded.
Support multiple DDNS provider service.
Support VLANs, MAC Address clone, PPPoE
WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge mode.
WIFI support WEP,WPA,WPA2 encryption, Support MAC address filter.
Support multiple online trigger ways, including SMS, ring and data. Support link disconnection when timeout
Support APN/VPDN
Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, traffic statistics, real time link speed statistics etc.
Full protocol support, such as TCP/IP, UDP, ICMP, SMTP(optional), HTTP, POP3(optional), OICQ(optional), TELNET, FTP(optional), SNMP, SSHD, etc.
Schedule Reboot, Schedule Online and Offline,etc.
Support GPS function (Optional)
| Standard and Band | IEEE802.11b/g/n |
| Bandwidth |
IEEE802.11b/g: 54Mbps (Maximum)
IEEE802.11n: 144Mbps (Maximum)
|
| Security | Support WEP, WPA, WPA2 encrypt methods, optional WPS function |
| Transmit Power | 15 ±2dBm |
| Sensitivity | < -72dBm @ 54Mbps |
| CPU | Industrial-grade CPU |
| Flash | 16MB(Extendable to 64MB) |
| DDR2 | 128MB(Extendable to 256MB) |
| WAN Interface | 1 x 10/100M RJ45 ethernet port, adaptive MDI/MDIX, built-in 15KV ESD |
| LAN Interface | 1 x 10/100M RJ45 ethernet port, adaptive MDI/MDIX, built-in 15KV ESD |
| Serial |
3 x RS232, 1 x RS485 serial interface with built-in 15KV ESD
Data bits:5, 6, 7, 8 bits
Stop bits:1, 1.5 (Optional), 2 bits
Error detection: none, even parity, odd parity, SPACE (Optional) and MARK (Optional)
|
| LED Indicators | “PWR”, “SYS”, “LAN”, “WAN”, “NET”, Signal Indicator |
| Antenna Interface |
Cellular: Standard SMA female antenna interface, characteristic impedance: 50 Ω
WIFI: Standard SMA male antenna interface, characteristic impedance: 50 Ω
|
| SIM/UIM Slot |
Standard SIM card slot, support 1.8V/3V SIM/UIM card, built-in 15KV ESD, support dual-SIM card
(optional)
|
| Power Interface | Standard 3.5mm terminal block interface, with built-in phase-reversal and over-voltage protection |
| Reset Button | Can reset router’s configuration to default factory setting by this button |
| Casing | Metal casing, IP30 protection level, suitable for most industrial control applications. |
| Dimensions | 126 x 89 x 30mm (excluding antennas and mountings) |
| Weight | 320g |
| Input Voltage | DC 12V/1.5A |
| Accepted Range | DC 5~36V |
File Name : Type: Size: Version:
YF330 Series ROUTER USER MANUA... PDF 1.26 MB
YF330 Series LTE WCDMA WIFI RO... PDF 859.54 KB
Add: 14th Floor, A06 Area,3rd Software Park, Jimei District, Xiamen,Fujian, China
E-mail: admin@yifanwireless.com
