R100-L1 is an 4G LTE Cat1 intelligent cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering etc. Software-defined, multi-carrier networking, dual SIM models, 802.11n and global 2.5G/3G/HSPA+/LTE options make it easy to get connected.
With DIN-rail mounting, wide operating temperature range, and IP30 metal housing, the R100 is a convenient yet reliable solution for any industrial wireless applications.
.jpg)
Design for Industrial Application
High-performance industrial-grade CPU
High-performance industrial-grade wireless communication module
Support low-consumption mode, scheduled power-on/power-off mode (Optional)
Metal casing, IP30 protection level, suitable for most industrial control applications. 
Wide range power input (DC 5~36V)
Stability and Reliability
SIM/UIM card slot with built-in 15KV ESD
Ethernet interface with built-in 15KV ESD
RS232/RS485 with built-in 15KV ESD
Multiple protection mechanism to ensure system stability, always keeping online
Auto recovery mechanism, including online detect and auto redial
Hardware and software WDT Watchdog design
Standard and Convenience
Standard RS232 (or RS485/RS422), ethernet, I/O and WIFI for connecting diverse field assets.
Provide standard wired WAN port (support standard PPPOE protocol)
Intelligent data terminal, automatically enter transmission status after power-on
Powerful central management software for easy device management (optional)
Easy to use and flexible, has multiple working modes
Convenient system configuration and maintenance interface (including local and remote WEB or CLI access)
DIN-Rail mounting, wall mounting or desktop
High-performance
Support 3G/4G and wired WAN dual link backup（Optional）.
Multiple WAN connection methods, include Static IP/DHCP/PPPOE/DHCP-4G
Support Load Balancer and Load Shunt (Only for dual sim dual module version)
Support APN/VPDN
Support NTP, RTC embedded.
Support multiple DDNS provider service
Support multiple online trigger ways,including SMS, ring and data. Support link disconnection when timeout
Support remote management, SYSLOG, SNMP, TELNET, SSHD, HTTPS, etc.
Support upgrade software from the local and remote maintenance.
Support SPI firewall, access control, URL filtering, etc.
WIFI 802.11b/g/n. Support AP, client, Adhoc, Repeater, Repeater Bridge mode.
VPN Tunnel: PPTP/L2TP/OPENVPN/IPSEC/GRE
Support TCP/IP, UDP, FTP (Optional), HTTP and other network protocols
Support DHCP server and DHCP client, NAT, DMZ, QOS.
Schedule Reboot, Schedule Online and Offline, etc.
Support GPS function (Optional)
| Standard and Band |
LTE FDD: B1/B3/B5/B7/B8/B20/B28 B1/B2/B3/B4/B5/B7/B8/B12/B17/B28/B66 (Optional), B2/B4/B5/B12/B13/B17/B66/B71 (Optional) LTE TDD: B38/B40/B41 HSPA+/HSUPA/HSDPA/WCDMA/UMTS 2100/1900/900/850MHz EV-DO: BC0 CDMA 1x: BC0 EDGE/GPRS/GSM 850/900/1800/1900MHz |
| Bandwidth |
LTE CAT4: 150Mbps(DL), 50Mbps (UL) LTE CAT6: 300Mbps(DL), 50Mbps (UL) DC-HSPA+: 42Mbps(DL), 5.76 Mbps(UL) HSPA+：21 Mbps(DL), 5.76 Mbps(UL) HSDPA：7.2 Mbps(DL), HSUPA：5.76 Mbps(UL) UMTS：384Kbps |
| Transmit Power |
< 23dBm |
| Sensitivity |
< -93.3dBm |
| Standard and Band |
IEEE802.11b/g/n |
| Bandwidth |
IEEE802.11b/g: 54Mbps (Maximum) |
| Security |
Support WEP, WPA, WPA2 encrypt methods, optional WPS function |
| Transmit Power |
15 ± 2dBm |
| Sensitivity |
< -72dBm @ 54Mbps |
| CPU | Industrial-grade 32-bit communication processor |
| Flash |
16MB(Extendable to 64MB) |
| DDR3 | 128MB |
1 x 10/100M RJ45 ethernet port, adaptive MDI/MDIX, built-in 15KV ESD
4 x 10/100M RJ45 ethernet port, adaptive MDI/MDIX, built-in 15KV ESD
1 x RS232/RS485 serial interface with built-in 15KV ESD
Data bits:5, 6, 7, 8 bits
Stop bits:1, 1.5 (optional), 2 bits
Error detection: none, even parity, odd parity, SPACE (optional) and MARK (optional)
Serial Port Rate: 2400~115200bits/s
"PWR", "SYS", "WIFI", "SIM", "Online", "Signal Strength"
6-pin 3.5mm wiring terminal,
2 inputs, 1 output, 1 relay; Controlled by Modbus protocol
Input high level: 5 to 30 VDC
Input low level: 0 to 3 VDC
Load current: 50mA @ 30VDC
Relay load 1A 250V AC/ 30V DC
Antenna Interface
Cellular: 2 * Standard SMA female antenna interface, characteristic impedance: 50 Ω
WIFI: Standard SMA male antenna interface, characteristic impedance: 50 Ω
Terminal power socket
SIM/UIM Slot
Standard drawer type user card interface, support 1.8V/3V SIM/UIM card, built-in 15KV ESD,
support dual-SIM card (optional)
| Casing | Metal casing, IP30 protection level, suitable for most industrial control applications. |
| Dimensions | 134.8 x 115.7 x 45 mm (excluding antennas and mountings) |
| Weight | 520g |
| Input Voltage | DC 12V/1.5A |
| Accepted Range | DC 5~36V |
File Name : Type: Size: Version:
Add: 14th Floor, A06 Area,3rd Software Park, Jimei District, Xiamen,Fujian, China
E-mail: admin@yifanwireless.com
